Canon mx310 driver cable mac os#
Canon mx310 driver cable download for windows#
Canon mx310 driver cable serial number#
Canon mx310 driver cable serial#
Canon mx310 driver cable upgrade#

Canon mx310 driver cable upgrade#

Until the upgrade is completed, DO NOT turn off the printer, or disconnect the USB cable. During the upgrade process, the printer LED blinks in orange. The upgrade will take about 5 to 10 minutes, depending on the computer. The progress will be indicated in the dialog box as follows: If the printer is turned off or the USB cable is disconnected during the operation, the printer will be damaged.

If the version number in the Current software version box is the same or higher than the Upgrade software version box, click 'Cancel'.Д¬AUTION: Until the upgrade is completed, DO NOT turn off the printer, or disconnect the USB cable.

If the version number in the Current software version box is lower than the Upgrade software version box, click 'Start'.

If your machine requires the firmware update, click 'Start'.

In addition to confirming your machine's model appears in the Printer Name field (in Step 2 of the Printer Upgrade Utility window), it is important that you verify the version numbers in the Current software version and Upgrade software version boxes.

Solution: Download the applicable upgrade firmware files, and perform the procedures from the beginning again. Solution: Turn on the printer power, and perform the procedures from the beginning again.Д¬ause 3: The downloaded upgrade firmware is not for your MX310. Solution: Connect the USB cable, and perform the procedures from the beginning again. If the following dialog box is displayed, the following causes are suspected:

Review the bulleted items in the Printer Upgrade Utility window (in Step 1) then turn on the printer, and click 'Next'.

Exit all application software, and double-click RomVUp to launch the Printer Upgrade Utility.

The registered user's data such as the one-touch and coded speed dial numbers are retained and you don't need to register them again. All the data received in memory will be cleared by the firmware upgrade.

* Before starting the firmware upgrade, print all received fax messages. * Connect a single MX310 printer unit to the computer via the USB cable, and disconnect all other printer units, if any. Remove the USB cable from the direct print port (PictBridge).(It will be helpful if you mark each line so that you can distinguish them when reconnecting them after the upgrade.) Disconnect the telephone cord from the external device jack and the telephone line jack (marked 'L').Connect the MX310 to the computer, using the USB cable.Upgrade procedure (UpgradeProcedure(Win).htm).The following files are contained in the same folder as the RomVUp file: Windows computer with the MX310 printer driver installed.The following items are required for the upgrade: It is located on the carriage flexible cable holder (visible on the right of the carriage after the machine is turned on, the scanning unit is opened, and the carriage moves to the center).

Canon mx310 driver cable serial#

Please open scanner unit to check the machine's serial number.

Canon mx310 driver cable serial number#

The serial number consists of four alphabet characters and five numeric characters.

To confirm which version is installed, follow the instructions to step 6 or print a User's Data List. If the firmware version is 1.040, this upgrade is not necessary.

Canon mx310 driver cable mac os#

Mac OS 10.x вЂ“ Linux 32bit & 64bit Download Canon PIXMA MX310 printer driverДownload link could automatic recognize your current OS version and give correct Canon PIXMA MX310 driver version compatible with your Windows or Mac versionДЄll Canon PIXMA MX310 drivers available on this website have been collected from CanonвЂ™s download pages.Firmware Upgrade Procedure If the machine's serial number is within the range that is listed below and the machine's firmware version is from 1.010 to 1.030, please upgrade the firmware to version 1.040 using the below procedure. Windows Vista (32-bit)- Windows Vista (64-bit) Language(s): English, Italian, Japanese, Korean, Russian, Indian, Chinese, Spanish, German, FrenchДЇile version: click to download link to see file versionДЇile server: .uk and If driver is missing Canon PIXMA MX310 stop workingДownload the latest version of Canon PIXMA MX310 Printer drivers according to your personal computer or laptopвЂ™s operating system.Д¬anon PIXMA MX310 printer Driver вЂ“ Software Details

Canon mx310 driver cable download for windows#

Canon PIXMA MX310 printer drivers download for Windows 10, Windows 8.1, 8, Windows 7, Windows XP, Windows Vista, Mac & Linux.ДЇor Canon PIXMA MX310 printer, a driver is necessary to enable the connection between your current Canon PIXMA MX310 printer and a PC or Mac.